BUET Test Report
BUET Strength of Materials Laboratory Test Report for MS Plates (ASTM A370)
Test Report for MS Plates (ASTM A370)
Department of Civil Engineering
Strength of Materials Laboratory
This is an official test report issued by the Strength of Materials Laboratory of the Bangladesh University of Engineering and Technology (BUET). The document details a tension test for MS plates conducted as per ASTM A370 standards. It includes test parameters such as angle size, coupon thickness, proof strength, ultimate strength, elongation, and bend test results.
The report is verified by BUET’s Bureau of Research, Testing, and Consultation (BRTC) and counter-signed by authorized personnel. The test samples are identified as “RIL XPOWER 345,” and all measurements are documented in both metric and imperial units.
BUET Material Testing Report: Hardness Assessment of MS Angles
Hardness Assessment of MS Angles
Department of Civil Engineering
Strength of Materials Laboratory
This document presents a hardness assessment for mild steel (MS) angles conducted by the Strength of Materials Laboratory at the Bangladesh University of Engineering and Technology (BUET). The test adheres to ASTM A370 standards and provides detailed Rockwell hardness results (B Scale) for samples labeled as “RIL XPOWER 345.”
The report includes measurements for various angle sizes and average hardness values, validated by BUET’s Bureau of Research, Testing, and Consultation (BRTC). It highlights the technical evaluation process for material strength and durability.
The report includes measurements for various angle sizes and average hardness values, validated by BUET’s Bureau of Research, Testing, and Consultation (BRTC). It highlights the technical evaluation process for material strength and durability.
BUET Test Report on Deformed MS Bars: ASTM A615M-16 Compliance
MS Bars: ASTM A615M-16 Compliance
Department of Civil Engineering
Strength of Materials Laboratory
Strength of Materials Laboratory
This document is an official material testing report issued by the Bangladesh University of Engineering and Technology (BUET) Strength of Materials Laboratory. The report evaluates deformed mild steel (MS) bars for compliance with ASTM A615M-16 standards. Sent by H.R. Re-Rolling Mills Limited, the tests cover parameters such as bar designation, actual diameter, unit weight, yield strength, tensile strength, elongation percentage, and bend test results.
The samples, identified with the “HRRM 60G” frog mark, include bar sizes ranging from 10 mm to 20 mm nominal diameter. Critical findings include individual and average values for proof load, yield strength, tensile strength, elongation percentage, and the overall bend test performance, all of which are classified as “Satisfactory.”
The report provides detailed comparison tables for compliance with ASTM A615M-16 specifications, including the required tensile and yield strength for different grades of steel. Additionally, conversion factors for unit transformations and specific measurement methods are documented. Verified by BUET’s Bureau of Research, Testing, and Consultation (BRTC), the report is counter-signed by authorized personnel, ensuring authenticity and accuracy for structural applications.
